8-Bit Catering Machine Modification Time Operation Process
Hello, first press the 'Menu' key to enter the system and find the system settings. Then enter the password, find the network service, select TCP / IP, and then press OK. After confirming, the machine will prompt to swipe the IP setting card. At this time, place the IP setting card in the card reading area of the desk-hung all-in-one. After the machine reads, restart the machine.
Hello, first press the 'Menu' key to enter the system and find the system settings. Then enter the password to find the modified terminal time.
Hello, first press the 'Menu' key to enter the system and find the system settings. Then enter the password to find the modified machine number.
Hello! There is a 'Query' button on the key of our machine. You first press the 'Query' button, and then put the card you want to check into the card reading area, and you can check the balance.
The factory default password is eight zeros. You can change the password after you log in. Please record the new password after modification.
There is a 'Statistics' button on the machine, press the 'Statistics' button, and then place the system authorization card in the card reading area. After reading it, restart the machine to complete authorization.
If the machine is off, please put the IP setting card in the read-write area of the bus credit card machine, and then turn on the machine. After the machine reads the card and "drops" the screen displays the network address and port, then remove the card and restart the machine.
Hello! In the report, there is a basic report with personal consumption records, which can be queried according to the conditions you enter.
The bus credit card machine mainly performs the credit card deduction function, and only the total number is displayed. If you want to see detailed data, please go to the report in our Tongka charge management system.
There is a menu bar for system settings in the card charge management system, and a system authorization in the drop-down menu. Authorize it in there, there is no order of authorization card.
The credit card machine shows that the connection to the server fails because the credit card machine is not connected to the acquisition software or the wireless upload data function is not enabled. This will not affect the swipe card, our swipe card machine can be used offline.
Using the GPRS network cannot be the ordinary broadband used by homes. If it is ordinary broadband, you need to buy a peanut shell software to fix the external network IP, so that the card reader can upload data normally.
To use GPRS, you need to prepare a SIM data card (that is, a general mobile phone card that only enables traffic), mobile or Unicom. Which type of data card to buy based on which network is better in your area.
Open the management software, find the user card recharge subsidy, read the IC card first, then write the amount to be recharged, and then click recharge to complete the recharge.
The two-hole line on the aviation head is the power cord of the credit card machine. Brown is positive and blue is negative. Find the constant fire power cord on the car, connect positive to positive, negative to negative. If there is a terminal plug on the car, please check whether the positive and negative of the terminal plug are correct to avoid burning the car insurance. The red wire in the box is a fuse, which is connected to the positive pole. If you want to connect the fuse, you can connect the fuse yourself.
If the machine is turned off, please put the system authorization card (the one with orange and blue on it or the card authorization card written on it) in the reading and writing area of the bus credit card machine, and then turn on the machine.
Connect the computer, start the acquisition monitoring system, select the terminal with errors, suspend the terminal first, right-click and select "Modify Terminal Settings", select the terminal memory format, and download the setting parameters after success. (If the memory still fails after successful execution, check the next step)
Consumption period setting: "Dining and dining period setting" under the "System settings" menu of the management system. When setting the dining group and time period, please pay attention to the number and the 24-hour format for the time format.
Check if the terminal setting parameters are correct. Whether the terminal type corresponds, and whether the network node of the string terminal is the same as the terminal.